How to install and maintain PVC sheet flooring?

Content Directory

Introduction of PVC sheet

Vinyl sheet flooring is a great option for many types of businesses. It is durable, easy to clean, and install in various ways. It is a relatively low cost, resistant to many chemical products, and easy to work with. But just because it’s widely used doesn’t mean you can install it without the right level of care or knowledge. Here are the steps you need to take when installing or maintaining the sheet vinyl flooring.

pvc floor

Tips before getting started

  • Get the tools to install your PVC sheets.
  • Prepare the base for the vinyl flooring installation.
  • Read the manufacturer’s instructions carefully. 
  • Vinyl flooring is available in various thicknesses, widths, and lengths. 
  • Do not forget to add an expansion joint around the room’s perimeter where you are installing the vinyl floor. 
  • Wear gloves and a dust mask when working with adhesive or primer. 
  • Make sure the subfloor is clean, dry, and level before beginning. 
  • Lay the vinyl floor in a well-ventilated room. 
  • If possible, lay the vinyl floors in several sections to avoid seams.

The Required Tools for Installation of PVC sheet flooring

  • Jigsaw 
  • Measuring tape 
  • Pencil 
  • Level 
  • Chalk line or string 
  • 100-foot (30.48-meter) heavy-duty chalk line reel or string 
  • Square-notched trowel 
  • Rubber float 
  • Vinyl adhesive (for solvent-based adhesives only) 
  • PVC primer
  • Utility knife
  • Wire Solder
pvc roll install

Preparing the base

  1. Remove existing flooring, such as vinyl tile, linoleum, or carpet. 
  2. If installing the Vinyl sheet over a concrete base, check for cracks or defects. 
  3. Fill in any cracks with a concrete patching compound and allow it to dry completely. 
  4. Sand down any high spots with a hand sander. 
  5. Clean the floor with a vacuum and damp mop to remove dust or debris. 
  6. If installing the vinyl sheet over wood, check for nails or screws that may protrude from the surface. 
  7. Remove all obstacles from the surface before you begin.

Installing Vinyl Sheet Flooring 

Step One: Clean the surface

It would help if you prepared the floor properly before laying any PVC flooring. If you install a PVC sheet over old flooring, you must remove it and cleanse the surface. You must make sure that there is no dust or dirt on the surface, as this can affect the adhesion of your PVC sheet to the floor so that it will peel off easily.

Step Two: Measure the Room

Measure the length and width of the room. Add an extra six inches (15.24 centimeters) to both measurements to account for waste. Use a chalk line or string to snap lines perpendicular to the direction of the vinyl planks.

Step Three: Mark the Subfloor

Use a pencil and measuring tape to mark the subfloor where you will install the vinyl sheet flooring. Use a chalk line or string to snap lines perpendicular to the direction of the vinyl planks.

Step Four: Install the Vinyl Sheet Flooring

Start in one corner of the room and unroll the vinyl sheeting. Apply pressure to the sheet with a rubber float to adhere it to the subfloor. Work your way across the room, using a square-notched trowel to spread vinyl adhesive on the subfloor. Cut the vinyl sheeting to size with a utility knife or power saw. Peel away the backing from the vinyl sheeting and place it on the floor.

Step Five: Trim the Vinyl Sheet Flooring

Use a jigsaw to trim the vinyl sheet flooring to fit around obstacles in the room, such as doors and posts. Use a rolling pin or hand roller to smooth out any bubbles in the Vinyl Sheet Flooring.

The Precautions of the installation of PVC sheet Sports and Commercial Flooring

The following is a brief introduction to the precautions for installing PVC sheets.

Measurement must be accurate before installation: patience and thoroughness should pay attention to your hands.

Before installation, you need to pay attention to the wall or floor. You need to make sure it is straight. If there are any problems, you must fix them first.

When cutting a PVC sheet, you can use a ruler (straight edge) to mark the cut line with a black pen on the back of the sheet, then cut along the line with a saw blade.

It is best not to trim the door frames and window frames too much when installing a PVC sheet in your home. It’s better to leave some gaps and fill them later.

During installation, we recommend you use glue or adhesive tape on the back of each piece of PVC sheet to make it fixed more firmly.

pvc sport floor install

Problems with daily use and maintenance of Vinyl Sheet Flooring

– Fading: Vinyl sheet flooring can fade when exposed to sunlight. To prevent this, install blinds or curtains in rooms with large windows.

– Scratches: Vinyl sheet flooring is susceptible to scratches from furniture legs and pet claws. Use furniture pads under the legs of chairs and tables, and trim your pet’s nails regularly.

– Damage from water: water can damage vinyl sheet flooring. Wipe up spills immediately and mop the floor with a mild soap and water solution to prevent this. Do not install Vinyl Sheet Flooring in rooms prone to moisture, such as bathrooms or laundry rooms.

– Adhesive Failure: If the adhesive fails, the vinyl sheet flooring can peel up at the edges or corners. To prevent this, use a thicker sheet for areas with high foot traffic.

– Sweep or vacuum the floor regularly to remove dirt and debris

– Mop the floor with a mild soap and water solution

– Wipe up spills immediately

– Avoid using harsh cleaners or abrasive pads

– Choose a thicker sheet for areas with high foot traffic

– The smooth surface is tranquil to clean and does not trap dirt or dust like carpeting can.

vinyl sport sheet install

PVC sheets from the perspective of sports floor and commercial floor

PVC sheet is one of the most preferably used for sports venues such as basketball courts and badminton courts. People also use it in commercial venues such as shopping malls and office buildings because of its unique wear resistance, waterproof performance, and low price.

PVC sheet is good for sports flooring because it is a water-resistant and durable material. Sports flooring needs to withstand heavy traffic, so using PVC for this application makes sense.

We can also use PVC sheets for commercial flooring, though the type of flooring may not always be obvious. For example, many hospitals use PVC sheets as the base material for their linoleum floors because they provide excellent structural integrity while still being inexpensive and easy to maintain.

sport floor install

PVC Sheet Commercial Flooring is a durable alternative to wood, ceramic tile, or stone. In addition, you can install PVC sheets over almost any surface as long as it is flat and dry. They are so versatile you can install them in any location, from kitchens and bathrooms to basements and restaurants. (Not suitable for kitchens and bathrooms etc.)

Another common use of PVC sheets is in playgrounds, where you can use it as a base material under mulch or sand to provide extra cushioning in case kids fall onto it. The PVC sheet also helps protect the equipment from the elements, lasting longer and maintaining its appearance.

Using PVC sheets for commercial and industrial buildings has many advantages. They are easy to keep clean. They do not require polishing or waxing, and they have a high resistance to wear and tear.

PVC sheet flooring is also slip-resistant, making it a good choice for areas with a risk of spills or where people may walk in with wet shoes.

pvc floor install

PVC sheets are available in a variety of colors and patterns, making it easy to find one that matches the décor of your business. 

Final Thought

When choosing PVC sheet flooring for your business, it is important to consider the type of traffic to use on the floor. If you have a lot of foot traffic, choose a thicker sheet. 

If you are looking for an affordable and durable flooring option for your business, Teeland PVC sheet flooring is the solution.

Teeland started in 2009 as a production company. We manufacture PVC vinyl commercial flooring and PVC vinyl sports flooring. Additionally, we provide online installation guidance or even arrange for a team to come and install the floor for you.

There are several designs and styles of the PVC vinyl sheets that we offer. You can choose to pick any of our patterned vinyl sheets for your sports flooring:

1. Sandy Pattern

2. Watercube Pattern

3. Marble Pattern

4. Oak Pattern

5. Braided Pattern

6. Pomegranate Pattern

7. Grandly Pattern

8. Hammering Pattern

9. Fabric Pattern

10. Gemstone Pattern

We have extensive experience in supplying PVC sports floors. Our distributors have supplied to the World Championships, the Olympic Games, world-class badminton, basketball tournaments, etc.

Furthermore, we serve clients such as hospitals, shopping malls, schools, and recreation centers for commercial PVC sheet flooring. Our products are comfortable, hard-wearing, and silent and are well received by our customers.

teeland factory

We also deliver vinyl sheet production according to our customers’ designs. This offer includes a wider range of customized PVC floors, thicknesses, and patterns.

Your PVC sheet flooring will last for many years with proper installation and care. Follow the tips in this guide to ensure that your PVC sheet flooring lasts for many years.

Send Us A Message

Get an instant quote from our most experienced consultants.

Contact Us Now

You will get a free industry manuals and sample